Stryker 6393 Manual De Operaciones página 13

Cot compatibility (Continued)
WARNING
• Install the cot fastener by qualified personnel only. Improper installation could result in injury to the patient or
operator.
• Always make sure that all cots meet the installation specifications for the Stryker cot fastener system.
Ambulance cots which currently meet these specifications are:
Stryker
• Model 6060 DX Emergency Transport
• Model 6070 LX Emergency Transport
• Model 6080 MX-PRO
• Model 6081 MX-PRO Incubator Transporter
• Model 6082 MX-PRO
• Model 6083 MX-PRO Bariatric Transport
• Model 6085 Performance-PRO XT
• Model 6086 Performance-PRO XT
• Model 6090 EZ-PRO
• Model 6091 EZ-PRO 2
• Model 6092 EZ-PRO R3
• Model 6092 EZ-PRO R4
• Model 6500 Power-PRO XT
• Model 6506 Power-PRO XT
• Model 6510 Power-PRO IT
• Model 6516 Power-PRO IT
Ferno-Washington
• Model 29-M Three Level Roll-In Cot*
• Model 93 ES Squadmate™*
• Model 93 EX Squadmate™*
• Model 35-A Mobile Transporter™*
• Model 35-A+ Mobile Transporter Plus™*
• Model 35-IT Incubator Transporter*
• Model 93P PROFlexx®
• Model 35X PROFlexx®
• Model 28Z PROFlexx®
• PowerFlexx®
Notes
• Adjustment of the rail clamp assembly may be required in order to compensate for any variation in cot retaining
post position depending on the ambulance cot manufacturer and model number.
• * 1999 model year or earlier. Styker is not responsible for changes in specifications to other manufacturer's cots.
www.stryker.com
Introduction
6370-109-005 REV C
English
EN
1-7