Installation Checklist - Stryker 6393 Manual De Operaciones

English
Follow this checklist with a Stryker Ambulance Cot Fastener Model 6370/6371/6377/6378/6391/6393 compatible cot.
EN
Make sure that you do not have any unused components after installation. Your Stryker Ambulance Cot
Fastener does not ship with any extra components. If you have any unused components after installation, call
Stryker service.
Visually check that all bolts and screws are tightened with no signs of protruding or missing fasteners.
Lift the vehicle bumper to the raised position, if equipped.
Load the compatible cot into the cot fastener (see
Make sure that the cot is locked into the cot fastener by pulling in and out and side to side on the foot end of the
cot.
Pull to remove the cot from the vehicle patient compartment. Make sure that the cot safety bar connects with
the vehicle safety hook before you remove the cot from the vehicle patient compartment.
Test the fastener for proper operation (see
Product serial number:
Installed by:
Inspected by:
Note: Maintain a copy of this record for at least seven years.
1-22

Installation checklist

Cot compatibility on page
Testing the cot fastener on page
Date:
Date:
6370-109-005 REV C
1-6).
1-25).
www.stryker.com