Maintenance And Cleaning; Kompernass Handels Gmbh Warranty; Warranty Conditions - Parkside PMFS 200 C3 Traducción Del Manual De Instrucciones Original

■ Never use the same sanding sheet for sanding
different materials (e .g . wood followed by
metal) . Optimum sanding results can only be
achieved by using clean sanding sheets .
■ Clean the sanding sheet every once in a while
using a vacuum cleaner .
■ Sand hard-to-reach places with the front or side
edge of the sanding sheet on the sander plate .
■ Guide the sander over the workpiece in parallel
and use overlapping sanding motions .
■ After completing the task, lift the appliance from
the workpiece and then switch it off .

Maintenance and cleaning

WARNING!
► Always remove the plug from the mains
power socket before carrying out any work
on the appliance .
The multi-sander is maintenance-free .
■ Always clean the appliance directly after com-
pletion of work .
■ Use a dry cloth to clean the housing .
■ Remove any sanding dust stuck to the appliance
with a brush .
■ Never use sharp objects, petrol, solvents or
cleaning agents which can damage plastic . Do
not allow any liquids to get into the interior of
the appliance .
■ Always keep the ventilation openings free of
obstructions .
■ 44 │ GB │ MT
Kompernass Handels GmbH
warranty
Dear Customer,
This appliance has a 3-year warranty valid from
the date of purchase . If this product has any faults,
you, the buyer, have certain statutory rights . Your
statutory rights are not restricted in any way by the
warranty described below .

Warranty conditions

The warranty period starts on the date of purchase .
Please keep your receipt in a safe place . This will
be required as proof of purchase .
If any material or manufacturing fault occurs within
three years of the date of purchase of the product,
we will either repair or replace the product for you
or refund the purchase price (at our discretion) .
This warranty service requires that you present the
defective appliance and the proof of purchase (re-
ceipt) within the three-year warranty period, along
with a brief written description of the fault and of
when it occurred .
If the defect is covered by the warranty, your prod-
uct will either be repaired or replaced by us . The
repair or replacement of a product does not signify
the beginning of a new warranty period .
PMFS 200 C3