Operating Anomalies - Eurocave WineArt Modo De Empleo

?
The air vacuum system red status light is flashing red.
> Air vacuum system fault alarm.
- the bottle may be incorrectly positioned: align the bottle correctly inside the
compartment then restart the white/rosé wine or red wine mode by pressing the
button.
- the bottle neck is blocked (by a cork or other object):
Remove any object that is blocking the bottle neck, then place the bottle in the
compartment, and restart the operation. Restart the white/rosé wine or red wine
mode by pressing the
- the plunger is in the raised position:
Move it down to the bottle neck. Restart the white/rosé wine or red wine mode by
pressing the button.
?
The yellow and red temperature programming indicator lights are both
on at the same time.
> Temperature sensor fault alarm.
The temperature sensor is faulty: unplug the appliance and contact an authorized
after-sales service.
?
The bottle of white/rosé wine is not sufficiently chilled.
> The serving temperature function has not worked correctly.
- the appliance is not correctly supplied with power: check that the appliance
is correctly connected to its power supply and the mains plug.
- the wrong control was used when setting the compartment: check that the
indicator light of the compartment concerned indicates white/rosé wine mode on
the control panel (yellow indicator light on, above the compartment).
- not enough time was allowed to bring the bottle to the correct
temperature: when a bottle of white/rosé wine is at an ambient temperature, the
appliance requires approximately 3 hours to gradually bring the wine to the correct
serving temperature.
- the ambient temperature surrounding the appliance is above 30°C. In
these conditions, it is impossible to make your bottle of white/rosé wine
any colder.
button.
-13-
Operating
Anomalies
7