Changing The Display Language; Changing The Base - Siemens Gigaset C2 Manual De Instrucciones

Preparing to use your phone
1. On the handset
[______________]
MENU
[__________] [_____________________________________________________________]
Handset Settings
[__________] [_____________________________________________________________]
Register Handset
[__________] [_____________________________________________________________]
Base 2
[_______]
OK
Base 2 flashes in the display when the system PIN has been entered.
2. On the base
Please refer to the operating instructions for the base to find out how to prepare the
base for registration.

Changing the display language

You can view the display texts in different languages.
[______________]
MENU
[__________] [_____________________________________________________________] Handset Settings
[__________] [_____________________________________________________________]
Language
[_________] [_________]
OK
If you set the wrong language in error, press MENU
s
language with

Changing the base

If your handset is registered to more than one base, you can set it to a particular base or
to the base that has the best reception (Best Base).
s
MENU;
Handset Settings
Base) OK
8
Press the display key to open the menu.
Select the menu item and confirm.
[_________ ]
OK
Select the menu item and confirm.
[_________ ]
OK
Select base (1–4) and confirm, e.g. Base 2.
[_________ ]
OK
Enter the system PIN of the base (the default is 0000)
and confirm.
Press the display key to open the menu.
Select the menu item and confirm.
[_________ ]
OK
Select the menu item and confirm. The current
language is checked
[_________ ]
OK
English).
Select a language and confirm.
Long press (back to idle status).
and press OK to confirm your choice.
s
OK;
Select Base
‰
(the default language is
M 2
. Now select the correct
s
(select a base or Best
OK;