Setting The Walk And Talk Mode; Activating/Deactivating The Walk And Talk Mode; Handset Settings; Activating/Deactivating Auto Answer - Siemens Gigaset C2 Manual De Instrucciones

Setting the Walk and Talk mode

The Walk and Talk function allows two C 2 handsets (maximum range 300 metres) to
call each other no matter how far they are from the base.
Precondition:
Both handsets have been registered to the same base or
N
Both handsets are registered to different bases and both are set to Best Base
N
(page 8) or
One of the handsets is not registered to any base and the registered handset is set
N
to Best Base or
Neither handset is registered to a base.
N
In Walk and Talk mode
i
The handsets cannot be reached by incoming calls,
N
Handset operating times are severely curtailed.
N

Activating/deactivating the Walk and Talk mode

s
MENU;
Additional Features
To deactivate: MENU;
Ring and advisory tones are set in exactly the same way as if your handsets at home
were in range of the base (page 20 and page 21).
'Activate/deactivate ringer' (page 20) and 'Activate/deactivate keypad lock' (page 9) are
available in the Walk and Talk mode.
The Walk and Talk mode is retained even when you switch your handset
i
off and back on.

Handset settings

Your handset is preset. You can change the settings to suit your requirements.

Activating/deactivating Auto Answer

With this function you simply lift the handset out of its charging shell when a call arrives
- there is no need to press
s
MENU;
Handset Settings
a
press and hold (return to idle status).
s
OK;
Walk and Talk
s
Walk and Talk Off
c
(the default is On).
OK;
Auto Answer
OK.
OK.
‰
OK ( = On);
Handset settings
19