Turning The Saw On/Off; Transporting The Saw - Delta 36-6022 Manual De Instrucciones

TURNING THE SAW ON AND OFF
The ON/OFF paddle switch is located on the left side of the front panel of the saw.
To turn the saw ON lift the switch. Press the switch down to turn the saw OFF.
When not in use, the saw should be turned off and the power switch locked out to prevent unauthorized use. To lock out
power switch, use a standard long shackle lock, with a shackle posts no larger than 9/32-inch (7mm) thick.
See Figure 33.

TRANSPORTING THE SAW

To fold stand for moving, return side and rear extension tables to inner position lock side extension into place. Stow rip
fence and miter gauge. Grasping handle bar, push the stand release pedal with foot and tilt up and forward until the saw
rests on the wheels and stand feet.
See Figures 34 & 35.
OPERATION
LOCK
OUT
FIGURE 33
FIGURE 34
ON
OFF
FIGURE 35
28