Harness Buckle - Britax ROUNDABOUT Guia Del Usuario

BRITAX Child Safety, Inc.
Replacing the Cover
1. Fit the child seat cover
around the child seat
shell.
2. Attach the plastic hooks
to the bottom edge of the
child seat.
3. Pull the buckle through
the slot in the cover.
Ensure that the buckle
is through the correct
cover slot for the buckle
position.
4. Feed each harness strap
through the desired
harness slots in the cover
and shell to the back of
the child seat.
5. Nest the harness straps
by inserting the right strap
loop into the left strap
loop.
6. Before reattaching the
harness straps to the
yoke, hold the harness
yoke as shown, and
ensure that the adjuster
strap attached to the yoke
is not twisted.
7. Slide nested harness
straps completely onto
the harness yoke.
36
8. Replace the belly pad.
a. Pull the elastic strap
around the buckle
b. Push the buckle
through the belly
pad

Harness Buckle

If your child eats and drinks while in the child seat, you will
need to check the buckle periodically and rinse out any
accumulated debris.
Removing the Harness Buckle
1. Unbuckle the harness.
Remove the belly pad and
push the buckle through
the cover.
2. Turn the buckle webbing
and slide it between
buckle positions.
3. Guide the buckle retainer
up through the slot in the
child seat shell to remove.
ROUNDABOUT User Guide
8a
8b
37