Gima OXY-50 Guía De Uso página 25

25
a. The highest/lowest alarm limit setting
Press the "up button" or " down button "to choose the parameter to be adjusted, then press the "left
button" or "right button" to change data. Each press of the "left button" or "right button", the data
will raise or descend for one time accordingly.
If the alarm function is on, the device will provide medium-priority alarm signal when the data
of SpO or pulse rate is beyond the limit. Intermittent alarm will occur and the measurement
2
shows in yellow.
Medium priority indicating that prompt operator response is required.
b. The alarm state setting
Press the" up button" or " down button" to select "Alarm", then choose the alarm state (on/off) by
pressing the "left button" or "right button", choose "on" to turn on the alarms, and choose "off" to
turn off the alarms for good.
c. Exit the Alarm settings
Press the "menu button" to exit the Alarm Settings Menu.
b) Pulse sound indication setting
On the main menu interface ,press the "up button" or "down button" to select "Pulse Sound", then
Press the "left button" Or "right button" to choose to have the Pulse Sound (heart beat) "on" or "off".
c) Backlight adjustment
On the main menu interface, press the "up button" or "down button" to select" Brightness", then
press the "left button" or "right button" to change the number in order to adjust the brightness of
screen.
d) Data storage setting
This device has the ability to store 24 hours worth of data. It can store the measured pulse rate and
SpO value accurately, transfer the data to the computer, display the data and print reports (with the
2
included SpO Software - Green Heart).
2
a. On the main menu interface, press the "up button" or "down button" to select "Record", then press
the "left button" or "right button" again to enter the dialog box of figure 10 or finger 11: if it is not in
recording state, will come into figure 10; if it is in recording state, will come into figure 11.
b. In the status shown in Figure 10, press "left button" or "right button" can change the setting of the
item, then press "menu button" to exit the status in Figure 10, and perform setting. YES for starting
recording, NO for do not recording.
c. In the status shown in Figure 11, press "left button" or "right button" can change the setting, press
"menu button" will exit the Figure 11, and perform setting. YES for stopping recording, NO for con-
tinue recording.
Figure 10.
ENGLISH