Gima OXY-50 Guía De Uso página 26

d. If the data storage function is being turned on, when return to the measuring interface, a red "REC"
sign and a flashing red dot would appear on screen, which means the device is in a state of storing.
e. In the state of storing, whatever interface the device is on (measuring interface, menu interface), the
sign "Recording" would appear on the screen in 30 seconds, and then the screen will be automati-
cally shut down. If pressing any button (power on/off excluded) at this moment, the sign "Recording"
would appear on the screen, and then the screen will be automatically shut down again; if pressing
the "power on/off button", the device would return to the former interface.
f. If turning on the data storage function, the former data storage will be automatically removed.
g. In the state of data storing, after the screen is automatically shut down, the pulse sound indication
would be off for saving power.
h. When the storage space is full, it displays "Memory is full" on the screen, and then shut down in
a few seconds. But it will still display "Memory is full" by the next time you turn on the device on
the purpose of warning the user, if press any button (power on/off excluded) again, it will enter the
measuring interface.
e) Device ID
The user could modify device ID by software "SpO
f) Clock setting
On the main menu interface, press the "up button" or "down button" to select "Clock", then enter the
clock setting interface by Press the "left button" or "right button".
a. When entering the clock setting menu, the menu choice bar would be on the item of "set time", and
the state would always be "no" whenever it enters the clock setting menu on the purpose of avoiding
unexpected changes of time due to improper operation. You can change the state by press the "left
button" or "right button", choose "yes" to reset the time, choose "no" to forbid time resetting.
b. Press the "up button" or "down button" to select the parameter that you want to change, then adjust
the data by press the "left button" or "right button".
ENGLISH
Figure 11.
Figure 12. Clock setting interface
Assistant".
2
26