Install The Server Into The Rack - Sun Microsystems Fire V480 Guía De Instalación Y Montaje

Install the Server Into the Rack

Caution – Before you install or remove the server from the rack, be sure the rack is
stabilized so that it cannot move or tip forward. See the rack documentation for
information about stabilizing the rack.
Caution – The server is heavy. Two persons are required to move the server.
1. Lift the server (one person on each side of the server) and approach the rack with
the back of the server facing the front of the rack.
2. Lift the server up and over the mounting screw on each side of the vertical
mounting rail so that the large hole clears the head of the screw.
Slide the server down so that the server rests on the mounting screws.
Chapter 2 Installing a Sun Fire V480 Server Into a 2-Post Rack en-25