Safety; Use For Intended Purpose; General Safety Information; Mounting And Connecting - Festo ESBF-BS Serie Instrucciones De Utilizacion

ESBF-BS/-LS-32 ... 100
2

Safety

2.1

Use for intended purpose

The electric cylinder is intended to be used for exact positioning of payloads in combination with tools
or as a drive when external guides are used. The following product features are characteristic:
– low-speeds, self-retarding (ESBF-LS with lead screw)
– high speeds, high forces (ESBF-BS with ball screw).
2.2

General safety information

• Take into consideration the legal regulations applicable for the location.
• Only use the product if it is in its original status and in an excellent technical status.
• Use the product only within the defined values (è 12 Technical data and 13 characteristics curves)
• Take into account labelling on the product.
• Do not make any unauthorised modifications to the product.
• Observe other applicable documents.
• Take into consideration the ambient conditions at the location of use.
Protect the product during storage and operation from the following:
– Wetness or moisture
– Corrosive coolant or other materials (e.g. ozone)
– UV radiation
– Oils, greases and grease-solvent vapours
– Grinding dust
– Glowing chips or sparks
2.3

Mounting and connecting

• Observe tightening torques. Unless otherwise specified, the tolerance is ±20 %.
2.4

Qualified specialists

Only qualified personnel may perform installation, commissioning, maintenance and disassembly of the
product. The qualified personnel must be familiar with installation and operation of electrical and pneu­
matic control systems.
20 Festo – ESBF-BS/-LS-32 ... 100 – 1504a English