Installation; Mechanical Installation - Festo ESBF-BS Serie Instrucciones De Utilizacion

ESBF-BS/-LS-32 ... 100
5

Installation

5.1

Mechanical installation

Prerequisites
• Do not modify the screws and threaded pins.
Exception: Direct request to make changes in these
operating instructions.
• Mount the motor on the electric cylinder using a motor
mounting kit (è Assembly instructions).
Permitted motor mounting kits
(è www.festo.com/catalogue).
• Connector motor cables only after the electric cylinder is
mounted.
Mounting position vertical or diagonal
WARNING
Uncontrolled moved masses caused by spindle nut
fracture inside the ESBF or a toothed belt failure in
parallel configuration EAMM-U (e.g. due to wear)
Injury from hard contact, impact, crushing.
• Check if protective measures are necessary to
prevent damage (e.g. toothed latches, pins or
emergency buffers).
Where necessary, take suitable measures.
22
Fig. 4
Fig. 5
Festo – ESBF-BS/-LS-32 ... 100 – 1504a English