De Dietrich DOP420 Serie Guía De Utilización página 39

99633771 ML.qxd 08/09/04
H
3. ow do you use the pyrolysis function?
1) How do you program for immediate pyrolysis?
a) Remove the grids and trays from the oven and
clean any major spill residue.
b) Ensure that the programmer is displaying the
time of day and that it is not flashing
c) Turn the «function selector» knob to the
«PYRO» position.
The duration of the pyrolysis cycle is 1:30
(non-adjustable) and the oven cannot be used for 2:00, 2:15 or 2:30.
This time includes the cooling time until the door can be unlocked.
• During the pyrolysis cycle, the padlock door lock symbol lights up in the display to
indicate that the door is locked.
• The thermostat indicator lights up when the oven is heating.
• Pyrolysis automatically stops when the lock warning light turns off and it is then
possible to open the door.
d) Return the function selector to the 0 position 0.
e) When the oven is cool, use a damp cloth to remove the white ashes. The oven is
clean and once again ready for the cooking application of your choice.
2) How do you program for delayed pyrolysis?
Follow the instructions described in the "How do you program for immediate
pyrolysis?" section, then:
a) Press the "SET" touch control. The end of cooking time flashes to
indicate that it is now possible to set it.
b)Press the + or - touch controls to set the desired end time.
Example: Cooking ends at 4:00.
After these steps, the beginning of the pyrolysis cycle is delayed so that it finishes
at 4:00. When the pyrolysis cycle is over, return the function selector to 0.
09:05 Page 39
How do you clean the cavity of your oven?
) or 1:45 ( ) or 2:00 (
GB
ECO
)
39