Functions C'm'a'b; Air-Conditioning Functions; Setting The Operating Hours Of The Tubes; Download Information - KBL megaSun Serie Manual De Usuario

Functions C'M'A'B'

Depending on the configuration of your system, the
menu item PIN II/CMAB
off certain functions.
PIN II
1. Invoke the menu and enter the PIN.
2. Set the desired value by pressing the plus and
minus buttons of the corresponding letter.
3. Save the settings by pressing START, press STOP
to leave the menu.
C (Channel) is deactivated if only external channel
selection with exactly one channel is available as
audio system for the unit. The channel-selection
symbol is not displayed.
M (Music) is deactivated if there is no audio system
available. No symbols regarding the audio system
are displayed.
A (Air-conditioning unit) is not displayed if the tanning
system is not equipped with an air-conditioning
unit. No symbols regarding air-conditioning are
displayed.
B (Facial tanners) you can switch the facial tanners
on or off here.

Air-conditioning functions

PIN II/ACS
The menu item
for the control of the air-conditioning system:
PRESETTING AIR-CONDITIONING UNIT (AIRCON)
AIRCON
Use the menu item
conditioning unit should start automatically at the
beginning of the tanning session (ON) or if it must be
activated manually by the studio customer (OFF).
PIN II
1. Invoke the menu and enter the PIN.
2. Press START to invoke the menu item
AIRCON
3. Select by pressing 5 (plus button) or 0
(minus button).
4. Activate the function by pressing 4 (plus button)
Settings on service level II
④ ⑤
allows you to switch on or
④
includes three submenus
to specify if the air-
ACS
.
or deactivate it by pressing 9 (minus button).
5. Use the START button to save the settings and
press STOP to exit the menu.
Setting the operating hours of
the tubes
④
PIN II/CM
Go to the menu item
the operating hours of the tubes.
PIN II
1. Invoke the menu and enter the PIN.
2. Press START to invoke
EINSTELLEN (SET OPERATING HOURS OF
TUBES) .
3. Enter the desired value by pressing 5 (plus button)
and 0 (minus button).
4. Save the settings by pressing START and exit the
menu using the STOP button.

Download information

PIN II/la.Download
The menu items
II/fi.Download
indicate time and date of the latest
( la.Download) or of the first (
software download.
PIN II
1. Invoke the menu and enter the PIN.
la.Download
2. Select
pressing 5 (plus button) or 0 (minus button).
3. Press the START
corresponding information.

Querying software info

Select the menu item PIN II/VERSION
the name and number of the installed software
version. This information is also displayed for approx.
2 seconds after the unit has been switched on.
PIN II
1. Invoke the menu and enter the PIN.
2. Press 5 (plus button) or 0 (minus button) to select
VERSION .
3. Press START to display the version information.
M a n u a l d e u s u a r i o | megaSun 4000 / 4500
if you want to enter
RöHRENSTUNDEN
④
PIN
and
fi.Download)
fi.Download
or
button to display the
④
to display
by
29