Connecting The Barcode Scanner; Setting Up The Wifi Connection; Connecting The Device To The Wifi  Network (Wps) - Seca 333 i Manual De Instrucciones

4.4 Connecting the barcode scanner

4.5 Setting up the WiFi connection

Setting the WiFi interface
Connecting the device to the WiFi
A barcode scanner can be connected to the USB interface (variant-
dependent).
Depending on the settings, the barcode scanner allows patient and user IDs
to be read and the patient data called up in an HIS or in seca software.
Measured results are then assigned to the patient data automatically and can
be saved in the HIS.
►
1. Select the menu item "rF" (see "Navigating in the menu" on page 57).
2. Confirm your selection.
3. Select the menu item "SYS".
4. Confirm your selection.
5. Select the desired setting:
6. Confirm your selection.
Connect your device to the WiFi network via WPS if you have access to the
network (WPS) router.
1. Select the menu item "rF" (see "Navigating in the menu" on page 57).
2. Activate the WPS function of your router as described in the instructions
NOTE
If you want to use the USB port or the WiFi interface (variant-depen-
dent), the power consumption of the device rises significantly. In these
cases, operate the device with the power supply unit provided.
NOTE
Observe the maximum permitted current consumption of the barcode
scanner (see "General technical data" from page 65). You can find a
list of recommended scanners at www.seca.com.
Plug the USB connector of the barcode scanner into the USB socket of
the device.
The current setting is displayed.
Option
WiFi interface automatically active in power supply
On
mode, switches off automatically in battery mode.
WiFi interface remains active in both power supply and
Perm
battery modes.
Off WiFi interface deactivated
You exit the menu automatically.
NOTE
As soon as the device is connected to a WiFi network, the Autohold
function is activated automatically. The Autohold function cannot be
deactivated if the device is connected to a WiFi network.
for use for your WiFi router.
Effect
Making the device operational • 51
English