Cleaning; Disinfecting; Scale; Measuring Rod (If Present) - Seca 333 i Manual De Instrucciones

6.1 Cleaning

6.2 Disinfecting

Measuring rod (if present)

6.3 Sterilizing

62 •
CAUTION!
Damage to device
Inappropriate detergents and disinfectants may damage the sensitive
surfaces of the device.
►
Use only disinfectants free of chlorine and alcohol which are explic-
itly suitable for acrylic sheet and other sensitive surfaces (active in-
gredient: quaternary ammonium compounds, for example).
►
Do not use caustic or abrasive detergents.
►
Do not use organic solvents (e.g. white spirit or petroleum spirit).
►
Use a soft cloth dampened with mild soapsuds to clean the surfaces of
the device.

Scale

1. Check that your disinfectant is suitable for sensitive surfaces and acrylic
sheet (active ingredient: quaternary ammonium compounds, for example).
2. Follow the instructions for use for the disinfectant.
3. Disinfect the device:
►
Moisten a soft cloth with disinfectant and wipe down the device.
►
Comply with the intervals: see table.
Before
After
If required
1. Check that your disinfectant is suitable for sensitive surfaces and acrylic
sheet (active ingredient: quaternary ammonium compounds, for example).
2. Follow the instructions on the disinfectant.
3. Disinfect the device:
►
Moisten a soft cloth with disinfectant and wipe down the device with
it.
►
Comply with the intervals, see table.
Before
measurement
After
measurement
If required
This device may not be sterilised.
Interval
every measurement
every measurement
Interval
every
Head stop, foot stop
every
Head stop, foot stop
• Controls
• Housing
• Measuring rod with scale
Component
Tray
Tray
Display elements,
controls, housing
Component