Changing Batteries; Servicing; Technical Data; General Technical Data - Seca 333 i Manual De Instrucciones

8.3 Changing batteries

Press!

9. SERVICING

10.TECHNICAL DATA

10.1 General technical data

Dimensions
• Depth
• Width
• Height
Net weight
• Scale without measuring rod
• Scale with digital measuring rod
• Scale with analog measuring rod
Ambient conditions, operation
• Temperature
• Air pressure
• Humidity
Ambient conditions, storage
• Temperature
• Air pressure
• Humidity
You need 6 AA-type batteries, 1.5 V. To establish the power supply, proceed
as follows:
1. Open the battery compartment.
2. Take the discharged batteries out of the battery compartment.
3. Put the new batteries in the battery compartment.
NOTE
Ensure the correct polarity of the batteries (markings on the battery
holder). If the display
teries the wrong way round or the batteries have discharged. If batter-
ies are inserted the wrong way round, they must be removed again
immediately.
4. Close the battery compartment.
The product must be set up carefully and serviced regularly. Depending on
how frequently the product is used, we recommended servicing at intervals of
3 to 5 years.
NOTICE!
Incorrect measurements as a result of poor servicing
►
Have servicing and repairs carried out exclusively by seca Service or
by an authorized service partner.
►
You can find service partners in your area at www.seca.com or by
sending an e-mail to service@seca.com.
General technical data
seca 234
seca 232 n
appears, you have inserted one of the bat-
bAtt
+10 °C to +40 °C / +50 °F to 104 °F
30 % - 80 %, no condensation
-10 °C to +65 °C / +14 °F to 149 °F
0 % - 95 %, no condensation
English
308 mm
650 mm
110 mm
approx. 3.7 kg
approx. 5.2 kg
approx. 5 kg
700 - 1060 hPa
700 - 1060 hPa
Servicing • 65