Lenze L-force Drives 9400 E94BSHE Serie Manual De Instrucciones página 98

6 Wiring the device
Important notes
(
Stop!
No device protection if the mains voltage is too high
The mains input is not internally fused.
Possible consequences:
ƒ
Protective measures:
ƒ
ƒ
)
Note!
Switching operations on the motor side of the controller are permitted for
safety switch−off (emergency off).
Please observe:
ƒ
ƒ
I
Tip!
Parameter setting and configuration can be carried out using the
L−force »Engineer«. For this purpose the Online Help and the Software Manual
for the standard device will guide you.
98
Destruction of the device if the mains voltage is too high.
Observe the maximally permissible mains voltage.
Fuse the device correctly on the supply side against mains fluctuations and
voltage peaks.
When the controller is enabled, switching operations may lead to a response
of the controller monitoring functions.
The switching elements on the motor side must be rated for DC voltages
with U = 800 V.
DCmax
l
EDK94SH366 DE/EN/FR/ES/IT 7.0