Lenze L-force Drives 9400 E94BSHE Serie Manual De Instrucciones página 118

6 Wiring the device
Power terminals
Device 292 A (150 kW)
The motor brake control modules differ in the following features:
Rated voltage
ƒ
Device size assignment
ƒ
Mounting type
ƒ
The table shows the module/controller assignments according to the features listed.
Single−axis controllers
Type
E94BSxE1454
...
E94BSxE4604
Tab. 6−2
118
24 V
E94AZHY0101
‚ ƒ
GG81
...
E94AZHB0101
GG91
‚ „
Motor holding brake/control module assignment
GGx Device size

integrated in the installation backplane, already used or retrofittable
‚
integrated in the device, already applied or retrofittable
(recommended variant for the same rated voltage)
ƒ
integrated control module (automatic brake operation can be activated)
„
external control (via digital output/digital input)
…
external mounting (DIN rail or mounting plate)
B
A
l
Rated voltage of motor holding brake (control module)
205 V
E94AZHN0025
„ …
E94AZHY0025
‚ ƒ
Mounting of motor brake control module
1. Insert motor brake control module with both clips 0
into the openings of the basic device and press
downwards until the two detents 1 engage audibly.
2. Check that the motor brake control module is
securely connected.
E94AZH123
180 V
E94AZHN0026
„ …
E94AZHY0026
‚ ƒ
EDK94SH366 DE/EN/FR/ES/IT 7.0