Creating A Standard Definition Image Quality - Sony HANDYCAM HDR-XR500 Guía De Operación

Creating a standard
definition image
quality (SD) disc with a
recorder, etc.
(A/V connecting cable
connection)
Youcan dub images played back on your
camcorder on a disc or video cassette,
by connecting your camcorder to a disc
recorder or a So W DVD writer, etc. with
the A/V connecting cable. Connect the
device in either way of [] or []. Refk, r
also to the instruction manuals supplied
with the devices to be connected. Select the
recording media that contains movies you
want to dub before starting the operation
(p. 43).
• Connect }Tourcamcorder to the wall outlet (wall
socket) using the AC Adaptor supplied fbr this
operation (p. 14).
• High definition image quality (HD) movies
will be dubbed with standard definition image
quality (SD).
[] A/V connecting cable (supplied)
Your camcorder is equipped with A/V
Remote Connector (p. 63). Connect the
A/V connecting cable to your camcorder.
[] A/V connecting cable with S VIDEO (sold
separately)
When connecting to another device
via the S VIDEO jack, by using an A/V
connecting cable with an S VIDEO cable
(sold separately), higher quality images can
be produced than with an A/V connecting
cable. Connect the white and red plug
(left/right audio) and the S VIDEO plug
(S VIDE() channel) of the A/V connecting
cable with an S VIDEO cable. If you
connect the S VIDE() plug only, you will
hear no sound. The yellow plug (video)
connection is not necessar?_
Connector
Input
s VII)EO
VIDEO
_-- ®<:_
(Ydlow)
(White)
z> V®_
AUDIO
D. L®._
(Red)
(_&llow)
,--_. Signal flow
Insert the recording media in the
recording device.
• If your recording device has an input _"
selector, set it to the input mode.
Connectyourcamcordertothe
recording device (a disc recorder, <
etc.) with the A/V connecting
cable [] (supplied) or an A/V
cable with S VIDEO
connecting
[] (sold separately). _-
• Connect your camcorder to the input jacks
of the recording device.
_9