Step 2:Turning
the power on, and setting
the
date and time
1
Open the LCD screen of your camcorder.
Your camcorder is turned on.
• To turn on your camcorder when the LCD screen is open, press POWER.
POWER
(Movie): Tn record movies
O (Photo): Tn record photos
Select the desired
geographical
area with D/_,
then touch
[NEXT].
Gh
vo
• To set the date and time again, touch l_ (HOME) _ _- (SETTINGS)
_
[CLOCK/IN LANG]
[CLOCK SETI. When an item is not on the screen, touch _/_
until the item appears.
Set [DSTSET] or [SUMMERTIME], date and time, then touch _
--_ _--_
13_3.
The clock starts.
• If you set [DST SET]or [SUMMERTIME]to [ON],the clock advances 1hour.
• The date and time does not appear during recording, but they are automatically
recorded on the
recording media, and can be displayed during playback. To display the date and time, touch t_ (HOME)
_
(SETTINGS) _
[VIEW IMAGES SET] _
[DATA CODE[
--* [DATE/TIME]
_
[_{] _ [3_]
_[X].
Xou can tunr off the operation beeps by touching _1_ (HOME)
m_ (SETTINGS) _
[SOUND/DISP
SET] --' [BEEP] --' [OFF] --_ [_
--_ [3_] --' [X].
_5