Kit Assembly - Metra 95-8223 Instrucciones De Instalación

Double DIN radio provision
1. Attach the clips removed from the
factory radio to the back of the radio
housing trim plate. (Figure A)
2. Attach the factory mounting brackets
and the Double DIN trim plates to the
Double DIN or the stacked ISO mount
unit(s) using the screws supplied with
the unit(s). (Figure B)
3. Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
4. Reassemble dash in reverse order
of disassembly.
95-8223

Kit Assembly

(Figure A) (Figure B)
3