Simple Cooking Commands; Setting The Temperature - Fulgor Milano CREATIVE CCSO 4511 TC Manual Del Usario

Simple cooking commands

Thanks to state-of-the-art controls, only two touches are required to set a cooking mode:
turn on the oven and select the most suitable function for the dish
you are about to cook... you choose it and you touch it!
GB
then
The control suggests a temperature for each function, which you can change at any time, but if you
consider it suitable, you don't need to do anything else, the oven will start by itself in just a few seconds!

Setting the temperature

The control uses a temperature probe that is accurate to ±5 °C for the maximum reliability of the
cooking temperatures requested.
You can change the temperature at any time. After selecting the cooking function just touch the
symbols and the temperature can be set in a range from +50 °C to MAX.
NOTE: some models may display the current temperature in the oven until the temperature set is
reached. If you want to check the temperature set, press any one of the
you can use them to change the temperature set.
Note: always be very careful when opening the door of the appliance because, depending on the case,
steam or boiling hot air could come out.
You don't need to confirm the change, the control activates
by itself after a few seconds.
During heating, the centigrade symbol (°C) flashes
to indicate that it is heating up to reach the selected
temperature.
When the temperature is reached, it beeps.
50
keys and, if you wish,