Fulgor Milano CREATIVE CCSO 4511 TC Manual Del Usario página 68

GB
Or directly select the function
of the preset time on the display.
ATTENTION: certain recipes use pre-heating, so put the dish in when the oven has reached the set
temperature and the display shows "PRE-HEATING FINISHED PUT IN THE DISH"
Note: If you are cooking with the modified parameters of a preset recipe,
while the oven beeps at the end of cooking, you will see:
see how to save recipes in the next paragrapha
IMPORTANT
AFTER YOU HAVE FINISHED STEAM COOKING, THE OVEN WILL START THE CYCLE FOR
EMPTYING THE WATER CIRCUIT.
which is flashing, which starts the cooking program with a countdown
When cooking is finished the display will show the text to the side, the buzzer sounds
and remains on until you press any key and open the door.
Note: at any moment, if you make a mistake choosing the values and/or you want to
change the settings of your recipe, you can select
you start over from the beginning of the procedure.
The following weight screen will appear, press
select one of the preset values and use
choice.
At the end of entering the settings, the display summarises
the recipe set.
The colon in the cooking time (0:40) will flash to indicate
that it can be changed.
To change it, press – and + .
68
to confirm the
which cancels it and allows
to