Accessories; Megapress™ System; Machine Storage - RIDGID MegaPress Manual Del Operador

Ocultar thumbs Ver también para MegaPress:
Tabla de contenido

Publicidad

MegaPress
NOTICE
Do not clean pressing profile with aggressive
abrasive materials or methods, such as emery cloth,
sandpaper, grinding wheels or rotary files. These meth-
ods may alter critical pressing profile dimensions and
cause improper pressed connections that can lead to
leaks and extensive property damage.
2. Inspect the segment area of the MegaPress jaws/
rings daily for debris or damage that could prevent full
closure and cause out of tolerance connections.
While holding the jaw/ring open, clean the areas next
to the segment with a brush. (See Figure 12)
Figure 12 – Cleaning Segment Area of MegaPress Jaw
3. Pivot pins and moving points on jaws, press rings and
actuators should be cleaned and lubricated at least
once a month with a light weight general purpose
lubricating oil.
4. Check return springs in press jaws, rings and ring
actuators with each use. Jaws and ring actuators
should open and close freely with only moderate fin-
ger effort required.
10
®
Fitting System

Accessories

WARNING
To reduce the risk of serious injury or incorrect
pressed connections, only use accessories specif-
ically designed and recommended for use with
MegaPress
®
Fittings such as those listed below.
MegaPress
®
System:
Standard Series MegaPress Jaw Sets
Catalog
No.
Description
37958
1
/
" MegaPress Jaw Set
2
37963
3
/
" MegaPress Jaw Set
4
37968
1" MegaPress Jaw Set
MegaPress Rings
Catalog
No.
Description
37973
1
1
/
" MegaPress Ring
4
37978
1
1
/
" MegaPress Ring
2
37983
2" MegaPress Ring
21878
V2 Actuator
MegaPress Kits and Accessories
Catalog
No.
Description
37953
MegaPress Kit
1
/
" - 2"
2
37998
Carrying Case for
Tool Kit
37993
1
/
" to 1" MegaPress Prep Tool
2
37988
1
1
/
" to 2" MegaPress Prep Tool
4
38008
Abrasive Strips for
(Pack of 10)
38003
Abrasive Strips for 1
(Pack of 10)
Press Tools
Catalog
No.
Description
27913
RP 330-B kit without Jaw Set
27938
RP 330-C kit without Jaw Set

Machine Storage

These tools and attachments must be
WARNING
kept indoors or well covered in inclement weather. Store
in a locked area out of the reach of children and people
unfamiliar with the tools. These tools can cause serious
injury in the hands of untrained users.
1
/
" - 2" MegaPress Jaw/Ring/Prep
2
1
/
" to 1",MegaPress Prep Tool
2
1
/
" to 2" MegaPress Prep Tool
4

Publicidad

Tabla de contenido
loading

Tabla de contenido