Battery Information - Clarity XLC3.4+ Guia Del Usuario

XLC3.4+
HANDSET
The batteries in the handset must be fully charged for 16 hours before using
the telephone for the first time.
Battery life: Talk time is 6.5 hours, while standby is 130 hours without
usage. Actual times will vary depending on the amplifier settings used.
Replace batteries every two years.
Battery spec (as supplied with your phone): 3xAAA NiMH rechargeable
batteries, (1.2V 600mAh NiMH - model 60AAAHC, GPI International Ltd. or
KH-44AAA-J600, Yiyang Corun Battery Co., Ltd).
To replace batteries, remove the handset battery cover and install new
batteries, then close battery cover.
BASE
The base backup batteries ensure the functionality of your cordless phone
(3-4 hours) in case of a power outage.
When the base unit operates in battery mode (no AC power). the base
POWER light will blink once every two seconds.
To install batteries in the base:
1. Turn base over and open battery compartment door.
2. Install batteries according to the polarity shown inside the battery
compartment.
NOTE: To replace handset batteries or to install base backup batteries, use
ONLY standard rechargeable AAA NiMH batteries - 600mAh.
LOW BATTERY INFORMATION
Handset
1. The battery icon on the screen shows no bars; the screen displays "Low
Battery".
2. The handset beeps every two seconds in OFF HOOK mode.
3. The TALK button blinks green twice every 15 seconds in standby mode.
It will not flash an alert in OFF HOOK mode.
Base (if optional batteries are installed)
1. The POWER light will blink green once every five seconds.
14

BATTERY INFORMATION

WARNING: Use rechargeable batteries only.
Do NOT use alkaline batteries!
Open battery
compartment
door here.