Abbott FreeGo Manual De Uso página 41

• Do not use excessive force when manually priming the Abbott FreeGo
feeding set. Doing so could alter feeding accuracy.
• If the pump is dropped it should be checked by Abbott Nutrition-authorised
technical personnel prior to use on a patient. Studies have shown that
dropping from any angle from a height of 1 metre (3 Feet) should not
damage pump operation.
• Whenever priming air from the Abbott FreeGo feeding set, make certain that
the feeding set is not connected to the enteral feeding tube.
• Prior to pump startup, user should:
1. Clean the pump (see CLEANING).
2. Inspect the pump and AC adapter charger, and should not use the
system if there is evidence of damage or tampering.
• User should verify that, during the pump startup, the pump's LCD display
and audio both operate according to the Self-Check Procedure (see the first
NOTE under TO START PUMP in the INSTRUCTIONS FOR USE). Do not
use if the pump's operation is not exactly as described.
• Only use approved Abbott FreeGo AC Adapter Charger or 12V Automobile
Charger to operate the FreeGo pump.
• There is a potential risk for entanglement with the tubing from a pump
set in some patient populations such as children. These patients should
be monitored during feeding as deemed necessary by their Health Care
Professional.
• The FreeGo pump battery may be fully discharged when received and
may require approximately 2 minutes of power prior to illumination of the
AC/Mains LED indicator.
44838 Rev. J
Page 39