Window Protocol; Serial Communication Descriptions; Description Communication Format - Agilent Technologies TPS-mini Serie Manual De Instrucciones

17 Technical Information

Window Protocol

The communication port mating connector is supplied with the
RS232 PCB (AMP/Cannon or equivalent 15-pin "D" type male
connector).
For example, the Transmit data signal from controller (pin 2) must be
connected to the host computer's receive data line (pin 2) and vice
versa. Consult the host computer's instruction manual for its serial
port connections.
Agilent cannot guarantee compliance with FCC regulations for radiated
NOTE
emissions unless all external wiring is shielded, with the shield being
terminated to the metal shround on the 0-subconnector. The cable should be
secured to the connector with screws.

Serial Communication Descriptions

This unit can communicate by two different protocol:
▪
▪
These two protocols can be used as well with 232 or 485 media.
Please use "Window" protocol for new development.
NOTE

Window Protocol

Description
Communication Format
▪
▪
▪
▪
300/318
protocol (old system) "letter"
"Window" protocol (new system).
8 data bit
no parity
1 stop bit
baud rate: 600/1200/2400/4800/9600 programmable
TPS-mini User Manual / 87-901-003-01 (E)