Festo MTR-DCI Manual De Instrucciones página 21

Connection on the MTR-DCI
3
Parametriza-
tion
4
Reference
switch
5
Controller
interface
(PLC/IPC)
6
Power
supply
1) with screw locking (external thread),
e. g. reference switch SMT-8M-...-M8D.
Extension cable for reference switch: KM8-M8-GSGD
2) Optionally connect logic voltage for MTR-DCI-42/52/62-...-CO/DN/PB
separately via fieldbus adapter.
Festo P.BE-K-MTR-DCI
– M8x1, 4-pin
– Socket
– M8x1, 3-pin
– Socket
MTR-DCI-...-IO:
– Sub-D 9-pin
– Plug
MTR-DCI-...-PB:
– Sub-D 9-pin
– Socket
MTR-DCI-...-CO:
– Sub-D 9-pin
– Plug
MTR-DCI-...-DN:
– Sub-D 9-pin
– Plug
– Sub-D, 2-pin
– Plug
English
1201c
Description
RS232 interface for
parameterizing, commissioning
and diagnosing
1)
Input for N.O. reference switch
(normally open); PNP.
I/O interface
PROFIBUS-DP interface and lo-
gic voltage for MTR-DCI-32
CANopen interface and logic
voltage for MTR-DCI-32
DeviceNet interface and logic
voltage for MTR-DCI-32
Load and logic voltage connec-
tion for MTR-DCI-IO and MTR-
DCI-42/52/62-...-CO/DN/PB
2)
21