Service Information; Top Cover Replacement; Air Cell Replacement; Control Unit Replacement - Stryker EOLE DC Powered Support Surface Manual De Operaciones/Mantenimiento

TOP COVER REPLACEMENT

Tools Required: None
Procedure:
1. Disconnect the hose assembly between the
mattress air cell and control unit.
2. Unzip the top cover.
3. Discard the old cover.
4. Place the new cover.
5. Carefully zip the cover.
6. Verify proper operation of the unit before
returning it to service.

AIR CELL REPLACEMENT

Tools Required: None
Procedure:
1. Disconnect the hose assembly from the air
valve of mattress.
2. Unzip 2-way zipper from either way to
remove the top cover and remove the CPC
tubes.
3. Remove and discard the old air cell.
4. Place the new air cell, connect the tubes
and zip the cover to close.
5. Verify proper operation of the unit before
returning it to service.

CONTROL UNIT REPLACEMENT

Tools Required: None
Procedure:
1. Disconnect the plug from mains power and
hose.
2. Discard the old control unit.
3. Place the new control unit and connect the
plug to mains power and hose.
4. Verify proper operation of the unit before
returning it to service.

HOSE REPLACEMENT

Tools Required: None
Procedure:
1. Disconnect the hose from control unit and
mattress.
2. Discard the old hose.
3. Connect the new hose to control unit and
mattress.
4. Verify proper operation of the unit before
returning it to service.

CPC TUBE REPLACEMENT

Tools Required: None
Procedure:
1. Disconnect the tube from control unit and
mattress.
2. Discard the old tube.
Return To Table of Contents
16

Service Information

3. Connect the new tube to control unit and
4. Verify proper operation of the unit before

FILTER REPLACEMENT

Tools Required: None
Procedure:
1. Discard the old filter.
2. Verify proper operation of the unit before

FOAM REPLACEMENT

Tools Required: None
Procedure:
1. Disconnect the foam buckles
2. Discard the old foam
3. Place the new foam
4. Buckle buttons
5. Verify proper operation of the unit before
Any replacement of non-authorized or wrong
parts may cause the unpredictable risk rise.
Please check the replaced part is suitable for
Stryker Medical's EOLE DC Powered Support
Surface, Model 2871.
836002-5210 V3.8
mattress.
returning it to service.
returning it to service.
returning it to service.
WARNING
www.stryker.com