Festo DFST Serie Instrucciones De Utilizacion página 17

DFST
4 Conditions of use
Please note
Incorrect handling can result in malfunctioning.
S Ensure that the specifications in this chapter are always observed.
Compare the maximum values specified in
S
these operating instructions with those of
your actual application (e.g. forces,
torques, temperatures, masses, speeds).
Operation of the product in compliance
with the relevant safety regulations is
contingent on adherence to the load
limits.
Take into consideration the ambient conditions at the location of use.
S
Corrosive environments reduce the service life of the DFST.
Ensure that there is a supply of correctly
S
prepared compressed air.
Maintain the selected medium for the
S
complete service life of the product.
Example:
if non−lubricated compressed air is used
at the beginning, always use non−lubri
cated compressed air.
Slowly pressurize the complete system.
S
There will then not be any uncontrolled
movements.
For slow start−up pressurization use
safety start−up valve type HEL.
Please comply with national and local
S
safety laws and regulations.
Remove all transport packaging such as foils, caps, cartons (except for plugs in
S
the pneumatic connections).
The packing is intended for recycling (except for: oiled paper = other waste).
Unauthorised product modification is not permitted.
S
Festo DFST 0710NH
mbar
%
C
Fig. 4
Fig. 5
Fig. 6
17