Installation Instructions - Festo CPX-FB11 Manual De Instrucciones

3

Installation instructions

3.1 Fitting
Field bus node CPX-FB11 is mounted in a manifold base of
the CPX terminal.
Screws,
1
tightening torque
0.9...1.1 Nm
2 Field bus node
CPX-FB11
3 Contact rails
4 Manifold base
Dismantling
Remove the screws and carefully lift up the field bus
S
node.
Fitting
1. Check the seal and sealing surfaces and refit the sub-
base.
2. Place the screws so that the self-cutting threads are
used. Tighten the screws by hand in diagonally oppo-
site sequence. Tightening torque 0.9...1.1 Nm.
Festo CPX-FB11 0206NH English
1
2
3
4
17