Clarity XLC7BT Guía De Referencia Rápida página 29

MENU - DATE & TIME
XLC7BT
In standby mode, press MENU. Press UP or DOWN arrow to advance the row
that reads "Date & Time". Press MENU to enter the date and time setup.
Use the numeric keypad to enter the date (follow format on screen). Press
MENU to save your selection. Use the numeric keypad to enter the time
(follow format on screen).
Press MENU to save your selection. The screen will display "OK" and you
will hear five beeps.
XLC7BT
Registering theXLC7HS
In order to use theXLC7HS handset (sold separately), you must register it to
the XLC7BT base.
Pull the handset's battery tab located on the bottom of the device, and
then press MENU to start registering or deregistering your handset from
your system.
To register an unregistered handset
1. Press MENU to enter registration mode. You will see displayed on the
screen, "Handset Needs Registration."
2. Press and hold the FIND key on the XLC7BT base for five seconds, until the
base visual ringer starts flashing. Release FIND key on the XLC7BT base.
3. Press MENU key on the handset.
4. The screen shows "Registering... ", then "Registration Successful"
(accompanied by five quick beeps).
5. Your handset is now registered to your XLC7BT system. Your screen
will display "Handset X," (where "X" is the number of the actual handset
registered, such as the second or fourth handset, etc.).
TO REGISTER YOUR HANDSET AGAIN (or to register to a different XLC7BT
system)
1. In standby mode, press MENU.
2. Press UP or DOWN to advance the row reading "Phone Setup". Press
MENU to enter the setup section. The screen displays "Register" on the
screen's top row now.
3. Press MENU to enter the Registration section.
4. Press MENU again to select "Register."
5. Follow the Registration steps listed above.
XLC7BT User Guide RevB.indd 27
HANDSET REGISTRATION
E
N
G
L
I
S
H
27
9/18/17 11:18 AM