EMAK EF92C/13,5M Manual Del Operador página 70

EN 18
➤
For hydrostatic drive models:
4.31 B
RAKE PEDAL
This pedal works the brake on the
rear wheels.
4.32 D
RIVE ENGAGEMENT PEDAL
This pedal engages drive in the
wheels as well as modulating the
machine's forward and reverse
speeds.
– To engage forward drive just
press it in the «F» direction with
your toe-cap, noting that increa-
sing the pressure on the pedal
progressively increases the
speed of the machine.
– Reverse is engaged by pressing
the pedal with the heel, in the
«R» direction.
– The pedal automatically goes
into neutral «N» when released.
WARNING!
!
stopped.
NOTE
when the parking brake (4.4) is engaged, the engine stops.
4.33 L
EVER TO RELEASE THE HYDROSTATIC TRANSMISSION
This lever has two positions as shown on the label:
«A» = Transmission engaged: for all usage conditions, when moving and
during cutting;
«B» = Transmission released: considerably reduces the effort required for
moving the machine by hand, with the engine turned off.
Reverse must only be engaged when the machine is
If the drive pedal is used, whether forwards or for reverse,
CONTROLS AND INSTRUMENTS
4.32
N
R
4.33
4.31
F
B
A