Grass-Catcher Assembly - EMAK EF92C/13,5M Manual Del Operador

EN 12

3.6 GRASS-CATCHER ASSEMBLY

The grass-catcher is assembled in four stages:
A) First of all assemble the frame, joining the upper part (1) to the lower part (2)
using the supplied screws and nuts (3) as shown. Position the angle plates (4)
and (5), making sure that they are for the right (R ) and left (L ), sides, and
attach them to the frame using the four self-threading screws (6).
B) Insert the frame in the canvas cover (7) making
sure it is correctly positioned on the base perimeter.
Hook the plastic profiles onto the frame tubes with the
aid of a screw-driver (8).
C) Fit the cover (9) onto the upper frame using the
screws (10).
D) Attach the stiffening bar (11) under the frame with screws and nuts (12), kee-
ping the flat part turned towards the canvas. Insert the emptying lever (13) in its
position and fit the limit stop screw (14) with its nut (15).
13
15
14
1 2
3
13
1
14 -15
4
R
3 2 11
UNPACKING AND ASSEMBLY
10
9
6
5
L
7
2
6
12 11
12
8
6
4 - 5