EMAK EF92C/13,5M Manual Del Operador página 72

EN 20
– stopping the engine if even just one of the safety requirements is lacking.
To start the engine it will be necessary that:
– the transmission is in "neutral";
– the blades are not engaged;
– the operator is seated or the parking brake is engaged.
The engine stops when:
– the operator leaves his seat when the blades are engaged;
– the operator leaves his seat when the transmission is not in "neutral";
– the operator leaves his seat with the transmission in "neutral" but without enga-
ging the parking brake;
– the grass-catcher is lifted or the stone-guard is removed when the blades are
engaged
The table below shows various operating conditions, highlighting why the safety
device shuts down the engine.
O G
PERATOR RASS
A) WHEN STARTING (Key in «START» position)
Sitting Uninfluential
Sitting Uninfluential
Absent Uninfluential
B) WHEN CUTTING (Key in «ON» position)
Sitting
Absent YES
Absent YES
Absent Uninfluential
- B
CATCHER LADES
Disengaged
Engaged
Disengaged
NO Engaged
Disengaged
Engaged
Disengaged
HOW TO USE THE MACHINE
T B
RANSMISSION
1....5 - F/R Engaged
«N» Engaged
«N» Disengaged
Uninfluential Disengaged
«N» Disengaged
Uninfluential Engaged
1....5 - F/R Disengaged
E
RAKE NGINE
Does NOT start
Does NOT start
Does NOT start
Stops
Stops
Stops
Stops