Quick Commissioning; Installer Interface; Language Selection - SOMFY Elixo 500 24 V Manual De Instalación

Connection to the power supply
To connect the motor to the power supply, use a standard, multicore cable with a minimum
cross section of 3x1.5 mm².
Inputs 23, 24 and 25 must be bridged to terminal 21 if they are not used to
connect a safety device.
Checking the motorisation wiring
Wire
Motor connection Red
Blue
End limit connection Brown
Red
Black
A
Switch on the power to the installation before commissioning.

QUICK COMMISSIONING

Installer interface

Parameter setting is carried out using the buttons on the control unit
Press ...
OK
+
-
OR
+ -
AND
(press simultaneously)

Language selection

[1] Press the OK button. Information is displayed on the screen (information
details - pg. 12).
[2] Press the OK button.
[3] Use the + and - buttons on the control unit to access the "LAnGUE" (Language)
menu.
[4] Press the OK button.
[5] Use the + and - buttons to access the required language.
[6] Press the OK button to confi rm your selection.
Copyright © 2008 Somfy SAS. All rights reserved.
Motorisation to the left (A)
Terminal
1
2
6
7
5
to...
enter the menu and sub-menu
confi rm a parameter setting
select parameters
modify a parameter value
exit the active menu
Motorisation to the right (B)
Terminal
2
1
7
6
5
OK
- +
+ -
Elixo 500 24 V
N
33
L
34
P1
B
PROG
OK
OK OK
- +
OK
- +
OK
- +
OK
- +
OK
7