Setup; Contents Of Crate; Glide Leveler Adjustments - Chattanooga ADAPTA ADP400 Manual De Usuario

setup

coNteNts oF crAte

After removing top and side panels of shipping crate, you may notice
metal bands and plastic straps. These are used to secure various
sections of the table and must be removed before the table can be
lifted out. The table must be lifted directly upward in order to clear all
shipping restraints.
Visually inspect for damage. Report any damage to the carrier
immediately.
A MINIMUM OF TWO PEOPLE WILL BE REQUIRED TO LIFT AND
MOVE THE TABLE. TABLE SHOULD BE LIFTED BY THE BASE
FRAME.
•
Do not lift the table by the Head Section.
Contents of Crate:
Model ADP400:
• Adapta ADP400 Table
• Traction Unit Stand
• Pivot Plate
• Mains Power Cord - 130 in (330 cm) in cable length, unshielded, 18 AWG
• Hand Control - 32 in (81 cm) in cable length, unshielded, 26 AWG
• Foot Pedal (Optional) - 32 in (81 cm) in cable length, unshielded, 26 AWG
• User Manual (CD-ROM)

Glide Leveler Adjustments:

Use a carpenter's level (fluid bubble type) to make adjustments to
each Glide Leveler of the table and tighten each glide with a regular
crescent wrench.
12
Adapta® ADP400