Festo CMMO-ST Safe torque off Nstrucciones De Utilización página 37

CMMO-ST Safe torque off
Auxiliary supply +24 V, pin 1 at [X3]
Version
Nominal voltage
Nominal current
Tab. 10 Technical data: Electrical data of the auxiliary supply output
Galvanic isolation
Galvanically isolated potential area
Tab. 11 Technical data: Galvanic isolation
Cabling
Max. cable length
Wire cross-section
Tab. 12 Technical data: Cabling at [X3]
Requirements for observing the certified UL conditions if the product is operated in the USA or Canada
can be found in the separate UL special documentation.
Festo – CMMO-ST Safe torque off – 1210a English
Voltage conducted from the motor controller (supplied at
[X9]). Not short-circuit proof.
[V] 24
[mA] 100 (not short-circuit proof)
The diagnostics contact is galvanically isolated from the
remaining electronics by an optocoupler.
[m] 30
[mm²] 0.14 ... 0.5
37