Changing The Drive Belt - HOLZMANN MASCHINEN D 460FXL Manual De Instrucciones

1. Lightly screw Allen screw
2. Lift the engine to belt tensioning device
Pull standoff right and unscrew the Allen screw
with pulley
HOLZMANN MASCHINEN GmbH
1.
2.
Allen screw
www.holzmann-maschinen.at
14.2
Allen screw
Redirecting the machine to 90° before
starting
1. Unscrew the cover belt
2. Secure the drive shaft left with pen or
Allen wrench and unscrew the
handwheel.
ATTENTION: Lefthand thread !
Tap out with soft hammer the drive shaft
carefully out of the bearing seat left
DANGER: be sure which side of the
encoder disk of the lock ring is inserted.
Can both the left and right to be.
The retaining ring is only used as shim!
Changing the
drive belt
Handwheel
36
D 460FXL