Starting / Stopping The Engine - Stihl FS Manual De Instrucciones

Floating Positions
Mowing tools (A) such as mowing
heads, grass cutting blades and brush
knives
should just touch the ground.
N
B
Circular saw blades (B)
should "hover" about 20 cm (8 in)
N
above the ground.
When the correct floating position has
been reached:
Tighten down the screw on the
N
carrying ring firmly.
FS
Starting / Stopping the
Engine
Starting the Engine
Always follow the starting procedure
A described in the basic power tool
instruction manual.
Place the unit on the ground: It must
N
rest securely on the engine support
and the deflector.
If fitted: Remove the transport guard
N
from the cutting attachment.
To reduce the risk of accidents, check
that the cutting attachment is not
touching the ground of any other
obstacles.
Make sure you have a firm footing,
N
either standing, stooping or
kneeling.
Hold the unit firmly on the ground
N
with your left hand and press down
– do not touch the throttle trigger,
lockout lever or slide control.
NOTICE
Do not stand or kneel on the drive tube.
WARNING
The cutting attachment may begin to
move as soon as the engine starts. For
this reason, blip the throttle after starting
– the engine returns to idling speed.
Now follow the starting procedure
described in the basic power tool
instruction manual.
Stopping the Engine
See basic power tool instruction
N
manual.
English
55