Use Instructions And Limitations; Do Not Use For; Respirator Selection And Training; Niosh Approval - 3M Whitecap W-8100B-CA Instrucciones De Uso

USE INSTrUCTIONS ANd LImITATIONS

do Not Use For

Respiratory protection when atmospheric concentrations of contaminates are unknown or immediately
dangerous to life or health, or in atmospheres containing less than 19.5% oxygen.

respirator Selection and Training

Use of these respirators must be in accordance with applicable health and safety standards, respirator
selection tables contained in such publications as American national Standards Institute (AnSI) Z88.2-
1992, Canadian Standards Association (CSA) Standard Z94.4 or pursuant to the recommendations of
an industrial hygienist. the employer must have a written respirator program in place that complies
with the occupational Safety and Health Administration (oSHA) respiratory standard 29 CfR 1910.134
prior to using any respirator. In Canada, follow CSA standard Z94.4 or the requirements of the authority
having jurisdiction in your region.
before use, the employer must assure that each respirator user has been trained by a qualified person
in the proper use and maintenance of the respirator and air supply components according to the
instructions contained in these User Instructions and other applicable User Instructions.
each person using this respirator must read and understand the information in these User
Instructions before use. Use of these respirators by untrained or unqualified persons, or use that
is not in accordance with these User Instructions, may adversely affect respirator performance
and may result in sickness or death.

NIOSH Approval

for a listing of the components of nIoSH approved 3M™ Abrasive blasting Respirator Systems, refer
to the nIoSH approval label, which accompanies the supplied air valves.

NIOSH Cautions and Limitations

this headgear is one component of a nIoSH approved respirator system. Refer to User Instructions
provided with the approved supplied air valves for the listing of the appropriate Cautions and
Limitations.

Eye, Face and Head Protection

Note: Users must evaluate their specific occupational hazards and choose products appropriate for
eye, face and head hazards in the workplace.
3M™ Abrasive blasting Helmet Assemblies meet the requirements of the AnSI Z87.1-2003, high
impact option. 3M recommends additional eye protection, such as safety spectacles or goggles, be
worn in conjunction with this headgear. this helmet helps provide limited face and eye protection
against certain flying particles. misuse may result in face and/or eye injury.
WArNING
WArNING
6