Specifications; Expected Useful Life; Components And Replacement Parts - 3M Whitecap W-8100B-CA Instrucciones De Uso

SPECIFICATIONS

materials
Helmet outer Shell
Helmet Inner Shell
outer faceshield
Inner faceshield
faceshield Covers
outer faceshield brim
Inner Shroud
outer Shroud
Performance
Airflow Range
Maximum operating
temperature (ambient air)
noise level generated by
the respirator
Weight
Helmet Assembly with Inner
and outer Shroud

Expected Useful Life

When used in accordance with these User Instructions, the useful life of the respirator is variable
depending on the use conditions. the respirator can be maintained for extended periods of time
by replacing worn or broken parts in accordance with the inspection procedures outlined in the,
"Inspection, Cleaning and Storage" section. Perform the User Performance Check outlined in the
"operating Instructions" section before each use.

COmPONENTS ANd rEPLACEmENT PArTS

do not use with parts or accessories other than those manufactured by 3M as described in these
User Instructions or on the nIoSH approval label for this respirator. do not attempt to repair or
modify any component of the system except as described in these User Instructions. failure to do
so may adversely affect respirator performance and result in sickness or death.
Polyethylene
Polypropylene
Cellulose acetate @ .040 in (.102 cm) thickness
Cellulose acetate @ .040 in (.102 cm) thickness
Polyester film @ .004 thickness (.10 cm) thickness
nylon
Polyester 65%/Cotton 35%
Vinyl-laminated polyester
6 to 15 cubic feet per minute [cfm] (170 to 425 liters per minute [lpm])
140ºf (60ºC)
74-78 db
5.2 lb (2.4 kg)
WArNING
8