3M™ Helmet Assembly Components - 3M Whitecap W-8100B-CA Instrucciones De Uso

3m™ Helmet Assembly Components
Helmet Shell Assembly
the 3M™ Helmet Shell Assembly consists of the 3M™ outer Shell, Inner Shell W-8005, Air Guide
W-8004, and Inner faceshield Gasket Kit W-8030 (fig. 1).
fig. 1 fig. 2
Inner Faceshield
the 3M™ Inner faceshield W-8160 is held in place by the Inner faceshield Gasket W-8030 and must
be used with the abrasive blasting helmet at all times.
Faceshield Frame and Latch Kit Assembly
the outer faceshield frame holds the 3M™ outer faceshield W-8101, faceshield Covers W-8102,
and Abrasive blasting Screen W-8115 or W-8116. the frame is held onto the outer helmet shell by
faceshield latches W-8111 and locking pins W-2849-2 (fig. 2).
Helmet Head Suspension
the 3M™ Head Suspension W-2878-2 provides a minimum safe clearance between the helmet shell
and the head. the suspension allows adjustment for head size, depth and balance.
Chin Strap
the 3M™ Chin Strap W-2913-2 is hooked to the inside of the helmet to assist in securing the helmet
to the wearer.
Inner Shroud
the 3M™ Inner Shroud W-8020-2 attaches to base of the outer helmet shell. the inner shroud may be
worn inside the work shirt to allow air to flow over the torso for added comfort.
Outer Shroud
the 3M™ outer Shroud W-8052 secures to the base of the outer helmet shell.
9