Picture Menu - JVC TH-A35 Manual De Instrucciones

Setting up the DVD Preferences
SOUND
CENTER
1
REAR-L
5
TEST CLEAR SETTINGFM MODE
9
DVD FM/AM
CONTROL
TV
TV VOL
TOP
MENU
CHOICE
CHOICE
DOWN - TUNING - UP
AUDIO SUB TITLE ANGLE ZOOM
RETURN DIMMER
DVD CINEMA SYSTEM

Picture Menu

You can select the desired options concerning a picture or monitor
screen.
On the Picture menu, you can set the following:
Language Picture Audio Setting
Monitor type
4:3Letter Box
TV System
NTSC
Interlace CVBS YUV
Progressive YP P
B R
Next Page
52
STANDBY/ON
AUDIO
TV VCR
SUBWOOFER
2 3 4
REAR-R
6 7 8
0
AUX PROGRESSIVE
TV/VIDEO SEARCH
VCR
MUTING REC/MEMORY
AUDIO VOL
MENU
3/2/5/∞
ENTER
ENTER
ON SCREEN
SLOW
DSP SURROUND
SLEEP
RM-STHA35U
Rating
Monitor Type: Select the TV screen size for playing back a
DVD recorded with 16:9 wide screen video
signal.
• 4:3 Letter Box: Select "4:3 Letter Box" when
the aspect ratio of your TV is
4:3. While viewing a wide
screen picture, the black bars
appear on the top and the bottom of the
screen.
• 4:3 Pan-Scan: Select "4:3 Pan-Scan" when
the aspect ratio of your TV is
4:3. While viewing a wide
screen picture, the black bars
do not appear, however, the left and right
edge sides of the pictures will not be shown
on the screen.
• 16:9 Wide: Select "16:9 Wide" when
the aspect ratio of the TV
is 16:9. (Set the screen
size to full on your TV.)
TV System: Select the color system.
• NTSC: Select this when the color system of your TV
is NTSC.
• PAL: Select this when the color system of your TV
is PAL.
Interlace: Select the video signal type.
• CVBS S_Video: Select this when you use the S-Video cord to
connect a TV.
• CVBS YUV: Select this when you do not use the S-Video
cord to connect a TV.
Progressive: You cannot select this item.
TE Mode: You can select the TE (Transition Effect) mode.
• On: When the picture changes and appears on the
TV, the picture appears with transition effect.
• Off: The picture appears without effect.
Pause/Still: You can change this mode to get better pictures
when the picture is unclear or noisy.
Normally select "AUTO." If the picture on a disc
is unclear or noisy, select "Frame" or "Field."
• Frame: Select this when the small text or fine
patterns cannot be seen clearly.
• Field: Select this when the moving picture is noisy.
• Auto: Normally select this mode. The system
selects the appropriate mode automatically.