Livestrong LS7.0B Manual Del Propietário página 12

ASSEMBLY STEP 5
12
NOtE: there is no hardware bag for this step. All hardware is pre-
attached.
A Attach the CONSOLE CAbLES and carefully tuck the CONSOLE
CAbLES into the CONSOLE mAST.
B Attach the CONSOLE to the CONSOLE mAST using the 4 PRE-
ATTACHED SCREwS (the screws will have to be removed from
the console first).
NOtE: Be careful not to pinch any wires while attaching the console.
C Attach the RIGHT PEDAL to the RIGHT CRANk ARm, tightening
it CLOCkwISE with the provided 13mm/15mm flat wrench.
d Attach the LEfT PEDAL onto the LEfT CRANk arm, tightening
it COUNTER-CLOCkwISE with the provided 13mm/15mm flat
wrench. (NOtE: the left crank arm is reversed threaded so it is very
important that it is tightened counter-clockwise. tightening it the
opposite way can damage the pedal or the crank arm or both.)
E Attach the wATER bOTTLE HOLDER to the CONSOLE mAST
using the PRE-ATTACHED SCREwS (screws will have to be
removed from the console mast first).
ASSEMBLY COMpLEtE!