Livestrong LS7.0B Manual Del Propietário página 8

ASSEMBLY STEP 1
SEAT SLIDE
REAR
PLASTIC CAP
8
SEAT FRAME
BOLTS (B)
MAIN FRAME
BOLTS (A)
REAR STABILIZER TUBE
HARDwARE bAG 1 CONtENtS :
BOLT (A)
20 mm
Qty: 2
Open HARDwARE bAG 1.
A
Attach the REAR STAbILIzER TUbE to the
B
mAIN fRAmE using 2 bOLTS (A).
Attach the SEAT fRAmE to the SEAT SLIDE
C
using 4 bOLTS (b).
Adjust the 3 LEVELERS so that the bike does
d
not rock and is level on the floor.
Attach the REAR PLASTIC CAP to the mAIN
E
fRAmE.
BOLT (B)
10 mm
Qty: 4
LEVELERS
ADJUST HEIGHT
LOCK ADJUSTMENT