Device Description; Initial Startup; Operation; Emptying The Collection Container - Kärcher IVR 100/40-Pp Hepa Exp Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Device description

For the figures, please refer to the
graphics page
Illustration A
Collection container
1
Lever for lowering the collection
2
container
Push handle
3
Suction hose connection
4
Pocket filter
5
Suction head
6
Suction head lock
7
Hepa filter
8
Filter cleaning handle
9
Lever for lowering the collection
10
container
Accessory holder
11
Chassis
12
Steering rollers with parking brake
13

Initial startup

For the figures, please refer to the
graphics page
1. Bring the device into the working po-
sition and secure with the parking
brake, if necessary.
2. Ensure that the suction head is fitted
correctly.
3. Check if the potential equalization
cable is connected correctly.
4. Insert the suction hose into the suc-
tion hose connection.
Illustration B
5. Plug the desired accessory onto the
suction hose.

Operation

ATTENTION
Danger due to rolling away
Danger of injury
Apply the parking brake during opera-
tion.
Only move the device at walking pace.
Have a second person help you on
sloped/uneven ground, if necessary.
1 Connect the compressed air supply.
6
2 Charge to the required air pressure
(6 bar / 87 psi)
3 Open the air pressure cock.
Suction process
1. Insert the suction nozzle in the ta-
pered connector on the suction hose
handle.
2. When vacuuming liquids and dust,
only insert the suction nozzle half
way into the material being vacu-
umed in order to convey sufficient
air.
 Do not place the suction nozzle
down with its entire surface.
 Hold the suction nozzle at an an-
gle to the suction surface so that
the material to be vacuumed is
sucked up together with air.
Cleaning the dust filter
Note
Clean the filter regularly to avoid a loss
of suction power.
Illustration C
1. Move the filter cleaning handle back
and forth several times to clean the
filter.
Emptying the collection
1. Switch off the device and disconnect
from the compressed air supply.
2. Clean the dust filter.
3. Lower the collection container by
pulling up the lever.
4. Empty the collection container into
the disposal facility.
5. Dispose of or recycle the contents in
accordance with statutory provi-
sions.
Note
English
container

Publicidad

Tabla de contenido
loading

Tabla de contenido