Length Function - Brother P-touch 1300 Manual Del Usaurio

Although the length of the printed label automatically adjusts to fit the length of the
entered text, there may be times when you will want to make a label with a specific
length. The length function allows you to set the label length between 1.6 and 11.8
inches (4.0 and 30.0 centimeters).
The default length setting is OFF. If ON is selected, the Length indicator at the bottom
of the display lights up.
Turning off the machine and then turning it on again changes the length setting
back to OFF.
To turn on or off the length function:
1 While holding down
display the current length of the label (the text and both margins) briefly, then dis-
play the current label length setting (ON or OFF).
2 While still holding down
length setting is displayed.
The Length indicator lights up when ON is selected.
3 Release
Code
To set the length of the label:
Home
4 Press or
length.
To change the length in 1" (1.0 cm) steps, hold down either
and then release the key when the desired setting is displayed.
The default setting (3.9" (10.0 cm)) can be selected by pressing
Memory
5 Press .
32

LENGTH FUNCTION

, press
Code
, continue pressing
Code
. If ON was selected, the current label length setting is displayed.
to select the desired length or use the number keys to enter a
End
Length
once, and keep
Q
Length
Q
held down to
Code
until the desired label
Home
or
End
Space
,
.